Heating Element 1500W/240V for KIP45

Here's the detailed information for replacing the 1500W/240V heating element in your Harvia KIP45 electric sauna heater:

Product ID: ZSL-310

Harvia KIP45 Heating Element (1500W/240V) Replacement Guide

1. Key Specifications

• Power Rating: 1500W

• Voltage: 240V AC (single-phase)

• Compatibility: Specifically designed for Harvia KIP45 models

• Element Type: Folded steel sheath construction

• Terminal Type: Nickel-plated screw connections

• Expected Resistance: ~38.4 ohms (when cold)

3. Installation Instructions

1. Safety First:

   • Disconnect all power at the circuit breaker

   • Verify no voltage present with a multimeter

2. Access the Element:

   • Remove the heater's side/rear access panel

   • Note wire positions (recommend photographing before disconnection)

3. Element Replacement:

   • Clean contact surfaces with electrical contact cleaner

   • Apply nickel-based anti-seize compound to threads

   • Torque terminal screws to 3-4 Nm (avoid over-tightening)

4. Post-Installation Check:

   • Verify all connections are secure

   • Check for proper grounding

   • Test heater operation gradually

4. Maintenance Tips

• Inspect elements annually for signs of:

  • Excessive oxidation

  • Warping or distortion

  • Hot spots (discoloration)

• Clean stone debris regularly to prevent airflow blockage

5. Price Range

• OEM Replacement: $85-$140

• Aftermarket Compatible: $60-$100 (verify exact specifications match)

6. Troubleshooting

If the new element doesn't function properly:

1. Verify voltage at terminals (should be 240V ± 10%)

2. Check continuity (should measure ~38.4 ohms when cold)

3. Inspect for:

   • Loose connections

   • Damaged wiring

   • Faulty temperature controls

For Exact Part Verification:
Please provide:

1. Your heater's serial number (located on rating plate)

2. Photos of the existing element

3. Any markings on the current element

This will ensure we identify the perfect replacement for your specific KIP45 model.

Safety Note: Always use personal protective equipment when working with electrical

components, and consider professional installation if unsure about any steps.