Material: 6mm thick cast iron with ceramic glass window
Standard Sizes:
Kuru 14-20: 280mm x 250mm
Kuru 18-24: 320mm x 280mm
Glass Size: Typically 190mm x 168mm (4mm ceramic)
Gasket: 10mm fiberglass rope (heat-resistant to 800°C)
Hinge System:
Uses 8mm diameter hinge pins
Bottom hinge is load-bearing
Air Control:
Integrated primary air vent in door frame
Glass Retention:
Spring-loaded stainless steel clips (not screw-mounted)
Remove Old Door
Support door weight
Drive out hinge pins upward with brass punch
Keep all hardware
Prepare New Door
Condition cast iron with stove polish
Install new gasket with high-temp adhesive
Pre-heat door to 100°C before first full firing
Install New Door
Insert bottom hinge first
Align top hinge pin
Test seal with paper test (should resist pull when closed)
Custom Fabrication:
Local foundries can replicate (~€350-500)
Must use same cast iron grade (GG20/GG25)
Temporary Repairs:
For minor cracks: Rutland stove putty
Warped doors can sometimes be straightened with careful heating
Complete door assembly: €220-380
Door only (no glass/hardware): €150-250
Gasket kit: €15-25
For exact replacement:
Locate serial number (back or side of stove)
Measure your existing door
Note hinge configuration
I can verify the correct part number with this information! 🔥
Pro Tip: Order replacement gaskets and glass clips when purchasing the door - they often need replacement together.