Narvi Air guide plate (Kuru 14-20)

If you're looking for a replacement air guide plate (ilmanohjauslevy) for a Narvi Kuru 14-20 wood stove, here's how to find the correct part:

Product ID: 152838

1. Confirm Your Narvi Model

The Kuru 14-20 is a popular Finnish steel stove, but verify:

• Check the data plate (usually on the back or side of the stove)

• Measure the existing plate dimensions (if still intact)

2. Air Guide Plate Specifications

• Material: Typically heat-resistant steel (often painted black)

• Function: Regulates primary/secondary air flow to optimize combustion

• Compatibility: Must match Narvi's internal stove dimensions

Option C: Custom Fabrication

If unavailable:

1. Trace the old plate (or measure opening)

2. Have a metal shop cut a replacement from 3-5mm steel plate

3. Drill mounting holes to match

4. 4. Installation Tips

1. Remove old plate: Usually held by small screws or slots

2. Clean air channels while accessed

3. Secure new plate without over-tightening (allows for thermal expansion)

4. Adjust air controls after installation to test airflow

5. Alternative Solutions

• If the plate is just warped: Remove and carefully hammer flat (when cold)

• For corroded plates: Sand and repaint with high-temp stove paint (800°F+ rating)

Need help verifying dimensions? If you can:

1. Share a photo of your stove's interior

2. Measure the plate opening (L x W x thickness)

3. Note how it's mounted (screws, slots, etc.)

I can help identify compatible alternatives! 🔥