Contactor ABB 30A AF-16-40-00-13 for Harvia Kip Heater

ABB 30A Contactor (AF-16-40-00-13) for Harvia KIP Electric Sauna Heater

Product ID: ZSK-778

1. Contactor Specifications

✅ Model: ABB AF-16-40-00-13 (or equivalent)
✅ Current Rating: 30A (suitable for most Harvia KIP heaters)
✅ Voltage: 230-240V AC (50/60Hz)
✅ Poles: 1NO (Normally Open)
✅ Coil Voltage: Typically 230V AC (verify your heater's control voltage)
✅ Mounting: DIN rail or screw-mounted

2. Compatibility

✔ Harvia KIP Models:

• KIP 6 kW / 8 kW / 9 kW (varies by version)

• Replaces old or faulty contactors in the heater’s control box

⚠ Check Before Buying:

• Your heater’s electrical specs (voltage, current)

• The existing contactor’s label (match coil voltage)

4. Installation Guide

1. Power Off: Disconnect the heater from mains power.

2. Access Control Box: Open the heater’s electrical compartment.

3. Replace Contactor:

   • Note wiring positions (take photos!).

   • Transfer wires one at a time to avoid mistakes.

4. Secure & Test:

   • Mount the new contactor firmly.

   • Restore power and test operation.

5. Safety Notes

❗ Warning:

• Only qualified electricians should perform replacements.

• Incorrect wiring can damage the heater or cause fires.

✔ Pro Tip:

• Apply dielectric grease to terminals to prevent corrosion.

6. Troubleshooting

🔸 Contactor Not Pulling In?

• Check coil voltage matches your system.

• Test for 24V/230V control signal from the thermostat.

🔸 Buzzing/Humming?

• Replace if contacts are pitted or worn.

Need help verifying compatibility?
🔹 Reply with:

1. Your Harvia KIP model number

2. Photos of the old contactor label

3. Your country’s voltage (e.g., 230V EU, 240V US)

I’ll confirm the exact replacement part! ⚡

(Note: ABB contactors are industrial-grade—expect 10+ years of reliable service.)