In-Shower Ventilation Exhaust Fan System
At the touch of the waterproof button, this innovative in-shower ventilation system balances the ambient temperature in the bathing environment and then removes vapor, helping to dry out the shower for a worry-free bathing experience.
Precision crafted and assembled from high-quality components, this cutting-edge Bathology ventilation fan system unites a switch, fan, damper, and grille for unmatched moisture control.
Fan Switch
Intuitive, low-voltage, and flush-mounted, this in-shower, fan switch features a soft-touch keypad with on/off, incrementally adjustable speed controls, and indicator lights. The lowest speed setting will remove excessive ceiling heat or allow for ideal thick, rich steam shower fog while the highest setting will clear steam and vapor in seconds. The integrated 20-minute automatic shutoff feature will allow for convenient set-it and forget-it, shower-drying results.
Waterproof Wall or Roof Fan
Essential to any steam and shower ventilation system is an exterior-mounted, waterproof fan. Unlike typical bath fans that push moisture-laden air, Atmospheric 410 wall and roof fans draw the air completely outside the home. U.L. listed for wet location use, these durable and efficient fans provide for ideal whisper quiet operation.
Motorized Damper
When keeping heat and moisture contained, only a motorized and tensioned damper with a waterproof pressure seal gasket will do. Once powered on, the Atmospheric 410 damper will open allowing heat and moisture to be drawn out of the environment. When turned off, or after 20 minutes, the damper securely closes and creates a seal to ensure no exchange occurs between in-home and outdoor air. The insulated duct work beyond the damper is left open to the outside air, allowing evaporation of any residual moisture.
Stainless Steel Grille
Bold and striking by design, the super quiet Atmospheric 410 boasts a grille befitting today's super shower. Concentrically fastened brushed stainless steel circles are separated by precise space for both ideal airflow and stylish design. Unlike traditional fan grilles, this element is impervious to moisture and heat.
Atmospheric 410 is an essential component of a luxury shower. Its in-shower keypad allows for convenient control of the bathing atmosphere while the motorized damper, insulated duct and exterior-mounted fan provide top-quality moisture evacuation. Nearly silent, this one of a kind wet environment fan system is sure to please the most discriminating bather.
Model: Atmospheric 410
Wall_Fan:
Type: Exterior, Wall, 4" Duct Connection
Duct_Connection: 4" Diameter
Duct_Extension: Aluminum, 12" Length
Dimensions: 10-1/2"W x 13"H x 6"D
Housing_Composition: Galvanized Steel, 20 Gauge
Housing_Finish: Baked Powder-Coat Finish, White
Air_Volume: 124 CFM
AC_Voltage: 120V AC
Power_Consumption: 19W
Nominal_Amperage: 0.17A
Lubrication: Permanently Lubricated, Sealed Ball Bearings
Protection: Thermal Overload, Automatic Reset
Speed_Control: 20-100%
Airstream_Tolerance: 34°-140°F
Weight: 8 lbs
Rough_In_Cut_Out: 4-3/8" Diameter
Testing: CSA Listed, UL Listed, Energy Star Rated
Roof_Wall_Fan:
Type: Exterior, Roof/Wall, 5" Duct Reducer Connection
Duct_Reducer_Collar: Galvanized Steel, 22 Gauge, 6" Length, 5" to 4" Diameter
Duct_Connection: 4" Duct
Dimensions: 10-15/16" Diameter x 6"H
Base_Plate_Dimensions: 15-1/2"W x 15-1/2"L
Housing_Composition: Galvanized Steel, 22 Gauge
Housing_Finish: Baked Powder-Coat Finish, Gray
Air_Volume: 116 CFM
AC_Voltage: 120V AC
Power_Consumption: 19W
Nominal_Amperage: 0.18A
Lubrication: Permanently Lubricated, Sealed Ball Bearings
Protection: Thermal Overload, Automatic Reset
Speed_Control: 20-100%
Airstream_Tolerance: 34°-140°F
Weight: 11 lbs
Rough_In_Cut_Out: 5-3/8" Diameter
Testing: UL Listed, CSA Listed
Damper:
Type: Motorized, Positive Close, Spring-Tensioned
Dimensions: 7-3/4"W x 10"L x 5"H
Body_Composition: Galvanized Steel, 28 Gauge
Blade_Composition: Galvanized Steel, 22 Gauge
Seal_Composition: Vinyl Foam, Low Density
AC_Voltage: 120V AC
Motor: High Torque
Endurance_Test: 100,000 cycles
Grille:
Type: Decorative, 4" Duct Connection
Dimensions: 6" Diameter, 1-1/2" Profile
Composition: 304 Stainless Steel
Finish: #4 Sanitary
Rough_In_Cut_Out: 4-1/4" Diameter
Elbow:
Type: 90°, Stamp/Stitch Welded, Flangeless, Dual-Gasketed
Composition: Galvanized Steel, 22 Gauge
Gasketing:
Type: EPDM Rubber, Dual - Wiper & Hollow
Wiper_Gasket: ASTM D2000-86 M3BA 810 B13 C12 F17, Black
Hollow_Gasket: ASTM D2000-86 M8BA 507 B13 C12, Green
Operating_Temperature: -20°F to 140°F
Duct:
Type: Insulated, Reinforced, Flex, Three-Ply
Interior_Dimensions: 4" Diameter x 25' Length
Exterior_Dimensions: 6" Diameter x 25' Length
Interior_Ply_Composition: Dual Lamination Polyester with Encapsulated Wire Helix
Middle_Ply_Composition: Fiberglass
Exterior_Ply_Composition: Polyester, Tri-Directional Fiberglass Scrim Reinforced, Gray
R_Value: 4.2
Operating_Temperature: -20°F to 140°F
Testing: UL-181
Duct_Tie:
Composition: Nylon, Natural
Operating_Temperatures: Max 185°F
Tensile_Strength: 175 lbs
Testing: UL 181-B-C Approved
Mastic:
Type: Duct Sealant, Water Based, UV Resistant
Composition: Liquid, Gray, 1/12-Gallon
Use: Indoor / Outdoor
Testing: UL 181B, USDA, FDA, EPA approved
Fan_Switch:
Type: Flush-Mounted, In-Shower
Voltage: 5VDC
Diameter: 2-1/32"
Trim_Depth: 3/16"
Trim_Finish: Polished Chrome or Brushed Nickel
Body_Diameter: 1-17/32"
Body_Depth: 1-5/16"
Rough_In_Cut_Out: 1-1/2" Diameter
Time_Circuit: 20-Minute Off Delay
Wall_Material_Thickness: 2-1/2"
Power_Supply:
Operating_Voltage: 120V AC
Nominal_Amperage: 15 AMPS
Length: 7-7/8"
Width: 7-1/2"
Height: 3-1/4"
Testing: CSA, Type 2