$79,995.00 $89,999.00
$99.00 $149.00 You save: 33% ($50.00)
Wall Band: 304 stainless steel strap (1" wide)
Adjustable Tension Rod: 3/8" diameter stainless
Roof Support Plate: 12-gauge stainless bracket
Fasteners: Stainless steel lag bolts/washers
| Feature | Specification |
|---|---|
| Material | 304 stainless steel (rust-resistant) |
| Load Capacity | 100 lbs vertical / 50 lbs lateral |
| Pipe Diameter | Fits 6"-10" Class A chimneys |
| Adjustment Range | 24"-48" from roof to brace point |
| Temperature Rating | -40°F to 1000°F |
DuraVent DVL-BRC6 (110)
For 6" chimneys
Includes seismic stabilizer
Selkirk SPSB-6 (150)
Heavy-duty 10-gauge
360° adjustability
ICC Excel Brace (130)
Corrosion-resistant coating
Easy-tension knob
Structural Mounting:
Must attach to roof rafters (not just sheathing)
Requires 3/8" x 3" lag bolts (included)
Positioning:
Install every 5-6 feet of chimney height
First brace within 24" of roof penetration
Angle Adjustment:
Maintain plumb alignment
Allow 1/4" flexibility for thermal expansion
Locate Rafters using stud finder
Pre-drill Holes through roofing material
Install Base Plate with silicone sealant
Attach Wall Band around chimney
Connect Tension Rod and tighten gradually
Verify Plumb with 4' level
❗ Critical Checks:
Meets UL 1037 standards
Maintains 2" clearance to combustibles
Never exceed 30° from vertical
✔ Pro Tips:
Apply anti-seize on threads
Use neoprene washers under roof plate
Inspect annually for tension loss
| Type | Price Range | Best For |
|---|---|---|
| Economy | 100 | Low-wind areas |
| Commercial | 160 | High-wind zones |
| Seismic-rated | 200 | Earthquake regions |
Need specific recommendations? Provide:
Chimney height above roof
Local wind/snow loads
Roofing material type
I'll suggest the perfect brace kit for your installation! 🔧
(Note: Some municipalities require professional installation - check local codes.)
