Sloped Overhang Roof Chimney Support Bracket (1 Left & 1 Right/Set)

Sloped Overhang Roof Chimney Support Bracket Set (Left & Right) - Professional Guide

Product ID: SB229

1. Key Features

• Purpose: Secures chimney pipes on sloped roofs (5/12 to 12/12 pitch)

• Set Includes: 1 left + 1 right bracket (must be used in pairs)

• Material: 14-gauge galvanized steel or 304 stainless steel

• Load Capacity: 50-75 lbs per bracket

• Pipe Compatibility: 6" to 10" Class A chimney pipes

2. Top-Rated Bracket Sets

3. Installation Requirements

1. Roof Pitch: Must match bracket's adjustable range

2. Mounting:

   • Secures to roof rafters (not just sheathing)

   • Uses 3/8" hex-head lag bolts (included)

3. Positioning:

   • Install within 24" of roof penetration

   • Space brackets 180° apart on pipe

4. Step-by-Step Installation

1. Locate Rafters using stud finder

2. Pre-drill Holes through roofing material

3. Install Flashing before brackets

4. Mount Brackets:

   • Left bracket on downslope side

   • Right bracket on upslope side

5. Secure Chimney:

   • Tighten band clamps evenly

   • Maintain 2" clearance to combustibles

5. Safety & Compliance

❗ Critical Checks:

• Verify UL 1037 listing for your chimney system

• Never exceed manufacturer's height limits

• Maintain required roof clearance (per NFPA 211)

✔ Pro Tips:

• Apply roof sealant around bolt penetrations

• Use stainless hardware in coastal areas

• Inspect annually for loose fasteners

7. Price Comparison

Need specific recommendations? Provide:

1. Roof pitch (e.g., 6/12)

2. Chimney pipe diameter

3. Roofing material type

I'll help select the perfect bracket set for your installation! 🔧

(Note: Always check local building codes - some areas require professional installation.)