Side Wall Chimney Support Bracket

Here’s a professional guide for selecting and installing a side wall chimney support bracket for wood stove or sauna heater installations:

Product ID: SB221

Side Wall Chimney Support Bracket Guide

1. Key Specifications

• Material: 12-gauge galvanized steel or stainless steel (304/316)

• Load Capacity: Typically 50-100 lbs (verify for your chimney)

• Adjustable Range: Fits 6"-10" diameter pipes

• Clearance: Maintains required 2" clearance from combustibles

2. Top Recommended Models

3. Installation Requirements

1. Mounting Surface:

   • Must attach to structural framing (not just drywall)

   • Use 3/8" lag bolts (included with most brackets)

2. Positioning:

   • Install every 5-6 feet of vertical rise

   • First bracket within 2 feet of elbow connection

3. Pipe Compatibility:

   • Works with Class A double-wall chimney pipes

   • Not for single-wall connector pipes

4. Step-by-Step Installation

1. Locate Studs using stud finder

2. Pre-drill Holes for lag bolts

3. Secure Bracket to wall

4. Adjust Collar to snugly fit chimney pipe

5. Check Level before final tightening

5. Safety Notes

❗ Critical Checks:

• Verify local building codes (IFC/NFP requirements)

• Never exceed manufacturer's weight limit

• Inspect annually for rust or loosening

7. Pro Tips

✔ Use firestop spacer when penetrating walls
✔ Apply high-temp silicone at pipe-bracket contact point
✔ Consider seismic kit in earthquake-prone areas

Need specific recommendations? Provide:

1. Chimney pipe diameter

2. Wall construction type

3. Total vertical rise

I'll suggest the perfect bracket for your setup! 🔧