$79,995.00 $89,999.00
$199.00 $299.00 You save: 33% ($100.00)
Harvia’s M3 series has slight variations. Check:
Data plate (on the back/side of the stove) for:
M3 (standard)
M3 SL (slimline)
M3 B/W (black/white variants)
Door dimensions: Typically 280mm × 250mm (measure to confirm)
| Feature | Details |
|---|---|
| Material | 5mm cast iron (painted black/white) |
| Glass | Ceramic (4mm thick, 190mm × 168mm) – if glass model |
| Gasket | 8mm fiberglass rope (replace with door) |
| Hinges | Asymmetric pins (top: fixed / bottom: load-bearing) |
Remove Old Door:
Lift straight up to disengage hinges.
Save hinge pins if reusable.
Prep New Door:
Apply stove polish to cast iron.
Install new gasket with high-temp silicone.
Hang New Door:
Align bottom hinge first, then top.
Test seal with paper test (should resist pulling when closed).
Custom Fabrication:
Local metal shops can replicate (~500).
Must use GG25 cast iron for heat resistance.
Temporary Fixes:
Patch cracks with Rutland stove putty.
Replace gasket only if door is intact.
| Component | Cost (USD/EUR) | Notes |
|---|---|---|
| Complete Door | 400 | Includes glass (if applicable) |
| Door Only | 300 | No glass/gaskets |
| Gasket Kit | 25 | Replace annually |
❗ Never use tempered glass—only ceramic (Schott Robax/Pyroceram).
❗ First firing: Heat gradually to 300°C (572°F) to cure gaskets.
❗ Hinge alignment must be precise—misalignment causes air leaks.
Need exact verification? Provide:
Serial number (backplate)
Photos of your current door/hinges
Measurements (if non-standard)
I’ll confirm the correct part number! 🔥
(Tip: Order spare hinge pins and gaskets—they wear out together.)
